200mW 532nm DPSS SLM Green Laser, S3 Series

Compact 532nm SLM Green DPSS Laser Single Longitude Mode 200mW CW Power 50m Coherent Length High Stability and Reliability

GL532S3-200
Optical Parameter
Output Wavelength	532nm
Spectral Linewidth	<0.0001nm
Output Power	200mW
Spatial Mode	TEM00
Longitude Mode	Single
Operating Mode	CW
Mode Quality (M2)	<1.2
Beam Divergence, Full Angle	1.5 ± 0.2mrad  [1]
Beam Diameter (1/e2) @ Exit	2.0 ± 0.2mm
Power Stability	3% (rms, over 2 hours, T= 25°C)  [2]
	10% (rms, over operating temperature)
Beam Pointing Stability	<50μrad over 2 hours (ambient ±5°C )
Polarization, Linear	100:1
Amplitude Noise (20Hz to 20MHz)	<0.5% rms
Coherent Length	>50m
Residual IR	<0.01%
Electrical Parameter
Power Supply	ADR-700D	DDR-7005
	Desktop PSU	5VDC Driver
Input Voltage	85~240VAC, 50/60Hz	5VDC
Modulation	None
Mechanical Parameter
Dimensions of Laser Head	140. 8 × 73 × 46. 2mm
Weight of Laser Head	0.6Kg
Dimensions of Power Supply	133 × 130 × 65mm	100 × 60 × 56mm
Weight of Power Supply	1.2Kg	0.2Kg
Reliability
Warm Up Time	<10 minutes
Cooling	Forced-air cooled  [3]
Operating Temperature, Case	10°C ~ 35°C
Storage Temperature	-20°C ~ 60°C
Expected Operation Lifetime	10000 hours
Warranty	12 months  [4]
Note
[1] 0.5mrad or 1.0mrad beam divergence is availlable upon request. [2] Better power stability (<1% rms, over 2hours, 25°C) is available upon request.[3] The Laser is designed to operate without heat sink. Do not restrict air circulation around the device; an additional heat sink can be used to maximize the performance and life time of the laser.[4] 2-Year Warranty is availlable upon request.

      

200mW 532nm DPSS SLM Green Laser, S3 Series